- User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Switch
- User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Troubleshooting
- User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Fan
- User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Car
- User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Problems
Jan 11, 2011 I have White-Rodgers programmable thermostat, model 1F78, am not the original owner, and have no manual. My model #. listed among the possible manuals online. I am unable to override the program, and want to temporarily increase the temperature on heat. Operating instructions White Rodgers 1F95EZ-0671 Thermostat User Manual Blue Easy Reader Thermostat Single Stage, Multi-Stage, Heat Pump Installation and Operating Instructions for Model: Save these instructions for future use!
Advertising
www.white-rodgers.com
CHECK THERMOSTAT OPERATION
Operating instructions White Rodgers 1F95EZ-0671 Thermostat User Manual Blue Easy Reader Thermostat Single Stage, Multi-Stage, Heat Pump Installation and Operating Instructions for Model: Save these instructions for future use! Dec 16, 2013 This video will cover the Programming of the Emerson Easy Reader Thermostat by White-Rodgers. Easy Reader Thermostat - Programming 1F95EZ-0671. White-Rodgers, a business of Emerson 2,774 views.
CONTINUED FROM FOURTH PAGE
5
1
Step
Press Button(s)
Displayed
Press or
(Factory Default)
to select:
2
OFF
4
Configuration Menu
3
CL
(OFF)
3 LO TO
3 HI
Set SYSTEM
switch to OFF
6
Move SYSTEM
switch from OFF
FA
(ON)
and
for at least 2 seconds
and
momentarily
and
momentarily
ON
0 HI
(0)
5*
OFF
and
momentarily
dL
(ON)
* Not available on earlier models
Return to normal operation
ELECTRICAL DATA
Electrical Rating:
20 to 30 VAC 50/60 Hz.
0.05 to 1.0 Amps (Load per terminal)
1.5 Amps Maximum Total Load (All terminals combined)
0.05 to 1.0 Amps (Load per terminal)
1.5 Amps Maximum Total Load (All terminals combined)
THERMAL DATA
Setpoint Temperature Range:
45
°
F to 90
°
F (7
°
C to 32
°
C)
Operating Ambient Temperature Range:
32
Singer sewing machine 1507 manual pdf. °
F to 105
°
F The aerial hoop manual volume 1 download.
Operating Humidity Range:
0 to 90% RH (non-condensing)
Shipping Temperature Range:
-40
°
F to 150
°
F
SPECIFICATIONS
6
Symptom
Possible Cause
Corrective Action
No Heat/No Cool/No Fan
1. Blown fuse or tripped circuit breaker.
Replace fuse or reset breaker.
(common problems)
2. Furnace power switch to OFF.
Turn switch to ON.
3. Furnace blower compartment door or
User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Switch
Replace door panel in proper position to engage
panel loose or not properly installed.
safety interlock or door switch.
TROUBLESHOOTING
Reset Operation
If a voltage spike or static discharge blanks out the display or
causes erratic thermostat operation you can reset the thermostat
by pressing
If a voltage spike or static discharge blanks out the display or
causes erratic thermostat operation you can reset the thermostat
by pressing
and
at the same time when system is
switched from “OFF” to “HEAT” position. This also resets the
factory defaults. If the thermostat has power, has been reset and
factory defaults. If the thermostat has power, has been reset and
still does not function correctly contact your heating/cooling ser-
vice person or place of purchase.
vice person or place of purchase.
Batteries
For optimum performance, we recommend replacing batteries
once a year with fresh “AAA” Energizer
For optimum performance, we recommend replacing batteries
once a year with fresh “AAA” Energizer
®
alkaline batteries.
7
Configuration Menu
The configuration menu allows you to set certain thermostat
operating characteristics to your system or personal requirements.
To enter the configuration menu, with SYSTEM switch in OFF
position, hold
operating characteristics to your system or personal requirements.
To enter the configuration menu, with SYSTEM switch in OFF
position, hold
and
for at least two seconds. To exit the
configuration menu, move the SYSTEM switch from the OFF
position.
position.
2. In the run mode, if the setpoint temperature is manually raised
by 3
°
F (2
°
C) or more above the actual temperature with the
TEMPERATURE UP key, and the fast second stage feature is
enabled, FA on, the second stage will energize immediately.
With FA off, second stage will not energize until the setpoint
temperature is 1
enabled, FA on, the second stage will energize immediately.
With FA off, second stage will not energize until the setpoint
temperature is 1
°
F or more above actual temperature for more
than ten minutes.
3. Select Compressor Lockout CL OFF or ON – Selecting CL
ON will cause the thermostat to wait 5 minutes before turning
on the compressor if the heating and cooling system loses
power. It will also wait 5 minutes minimum between cooling and
heating cycles. This is intended to help protect the compressor
from short cycling. Some newer compressors already have a
time delay built in and do not require this feature. Your com-
pressor manufacturer can tell you if the lockout feature is
already present in their system. When the thermostat compres-
sor time delay occurs it will flash the Snowflake and Flame
Icons for about five minutes.
on the compressor if the heating and cooling system loses
power. It will also wait 5 minutes minimum between cooling and
heating cycles. This is intended to help protect the compressor
from short cycling. Some newer compressors already have a
time delay built in and do not require this feature. Your com-
pressor manufacturer can tell you if the lockout feature is
already present in their system. When the thermostat compres-
sor time delay occurs it will flash the Snowflake and Flame
Icons for about five minutes.
4. Select Temperature Display Adjustment 3 LO to 3 HI –
Allows you to adjust the room temperature display up to 3
°
higher
or lower. Your thermostat was accurately calibrated at the
factory but you have the option to change the display temperature
to match your previous thermostat. The current or adjusted
room temperature will be displayed on the left side of the display.
factory but you have the option to change the display temperature
to match your previous thermostat. The current or adjusted
room temperature will be displayed on the left side of the display.
9 Displays currently programmed set temperature (this is blank
when SYSTEM switch is in the OFF position).
10 “BATT” is displayed when 2 “AAA” batteries are low and
should be replaced.
5. Select Backlit Display – (Not available on earlier models) The
display backlight improves display contrast in low lighting
conditions. Selecting backlight ON will keep the light on
continuously. Selecting Backlight OFF will keep the light off.
conditions. Selecting backlight ON will keep the light on
continuously. Selecting Backlight OFF will keep the light off.
Advertising
Popular Brands
Popular manuals
Do not use on circuits exceeding specified voltage.
Higher voltage will damage control and could cause
Do not short out terminals on gas valve or primary
control to test. Short or incorrect wiring will damage
property damage.
system shall conform to Class II (current limited)
circuits per the NEC code. Failure to do so could cause
FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS CAREFULLY
BEFORE INSTALLING OR OPERATING THIS CONTROL COULD CAUSE
DESCRIPTION
ELECTRICAL DATA
20 to 30 VAC 50/60 Hz. or D.C.
1.5 Amps Maximum Total Load (All terminals combined)
Setpoint Temperature Range:
Operating Ambient Temperature Range:
Operating Humidity Range:
Shipping Temperature Range:
APPLICATIONS
•Standard heat pump systems with electric, gas or oil
•Single-stage heat pump systems with no Aux heat with
DO NOT USE WITH:
•Systems exceeding 30 VAC and 1.5 amps
1F82-261
Heat Pump Thermostat
OPERATION INSTRUCTIONS
PART NO. 37-6175D
0225
This thermostat is intended for use with a low voltage NEC
Class II system. Do not use this thermostat with a line voltage
system. If in doubt about whether your wiring is millivolt, line, or
low voltage, have it inspected by a qualified heating and air
Do not exceed the specification ratings.
All wiring must conform to local and national electrical codes
This control is a precision instrument, and should be handled
carefully. Rough handling or distorting components could cause
To prevent electrical shock and/or equipment dam-
age, disconnect electric power to system at main fuse
or circuit breaker box until installation is complete.
WHITE-RODGERS
9797 REAVIS ROAD
www.white-rodgers.com
!CAUTION
!WARNING
•LCD continuously displays set point, and alternately dis-
•Continuous Backlit display option
•Manual program override (HOLD temperature)
•°F/°C convertibility
•R, C, Y, W2, G, O/B, E, and L terminals for single or two-
Your new White-Rodgers 5-Day/1-Day/1-Day Digital Thermo-
User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Troubleshooting
stat uses the technology of a solid-state microcomputer to
provide precise time/temperature control. This thermostat offers
you the flexibility to design heating and cooling programs that fit
User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Fan
Features:
•Separate 5-day (weekday) and 1-day/1-day (Saturday/Sunday)
programming with four separate time/temperature periods per day
User Manual For Programmable White And Rodgers Thermostat 1f95ez0671 Car
•Preprogrammed temperature control